 |
Warren Rupp Pumps/SandPIPER Pumps |
View this product online at: www.warrenrupp.com
Warren Rupp pumps are manufactured in aluminum, cast iron, stainless steel, Hastelloy, polypropylene, PVDF, Nylon and Conductive Acetal. Self-priming and Seal less, they are ideal for pumping abrasive, semisolid, corrosive and shear sensitive materials. They are also chosen for applications where electricity is not available, or cannot be used due to safety conditions. Diaphragm pumps provide pollution-free and energy-efficient operation, with fewer moving parts than conventional motor-driven pumps.
Advantages:
A SINGLE, no-stall air drive system (ESADS®) on all models provides GUARANTEED no-stalling performance, eliminating the need to choose among technologies for different operating conditions.
The INNOVATION of Warren Rupp provided the first BOLTED AODD pump design (35 years ago) that continues to provide service life in excess of service intensive V-band designs.
New innovations include "RuppGUARDTM Spill Prevention" models from Warren Rupp. These AODD pumps are comprised of a primary and secondary pumping diaphragm for each chamber separated by an inert, compatible fluid barrier. Buyer motivations include:
For hazardous fluids (example: hydrochloric acid) a pump diaphragm failure does not stop the pump from finishing batch transfer, and provides protection of the environment by preventing fluid from entering and being exhausted through the air exhaust.
Maintenance costs are significantly reduced for many fluids because in the event of a diaphragm failure, the air drive system is not contaminated or in need of extensive cleaning or replacement.
Air is prevented from entering the fluid being pumped, so critical applications (example: ceramic slip) where air mixed with the transfer fluid would degrade the final product can be performed reliably even in the event of diaphragm failure.
In short, the RuppGUARDTM Spill Prevention models offer benefits unequaled by the competition that provide the least risk and best value for critical process applications.
SA3-A Flap Valve
Flap valve SA series SandPIPER(r) pumps are especially recommended for
slurries and liquids with suspended solids. Flap-valves allow passage of
suspended line-size solids without damage. Variable discharge porting
options available on the 1" pump model.
Pump Specifications
Pipe Size: 3" / 80mm
Displacement Per Stroke: 1.62 gal / 6.15 ltr
Max. Flow per Minute: 260 gal / 988 ltr
Max. Solids Handling: 3" / 76mm
Max. Discharge Pressure: 125 PSI / 8.6 BAR
| Warren Rupp Pumps/SandPIPER Pumps |
| 
